09-2900-1

Eurolux-BAV Vacuum Process Equipment A-700

New product

Quantity: 1

Warning: Last items in stock!

172 446,00 €

Eurolux-BAV Vacuum-processing system Type A-700

 

Container capacity:                            700 liters

Batch size:                                         200 - 550 liters

Cold production: output approx.          3-4 batches / hour.

Pressure resistance:                           vacuum-proof -1 bar / + 1.5 bar

Bottom design:                                  cone

Tank inlet:                                          DN 65 right-angled, left (threaded connector DIN 11851)

Container outlet:                                DN 125 (flange firmly screwed)

Pressure relief valve:                          DN 25

 

Product area:                                     food

Product contact:                                V4A AISI 316 (1.4571)

Surface quality:                                  sanded, grain 240

Seal quality:                                       EPDM

 

Extras / surcharge:                           1) Kieselmann valves, surcharge depending on the
                                                         type of equipment, see price list

 

Fittings:                                             DIN 11851

Operation voltage:                              400 volts, 50HZ, 3 phases N, P, PE

Control voltage:                                 24V DC

Air connection:                                   ¼ “5-6 bar

Homogenizer:                                    type Eurolux 22 kW 3000 RPM

Vacuum system:                                1.5 kW

Agitator:                                            2.3 kW 10-40 rpm

 

Inlet nozzle right:                                DN 50 

Inlet nozzle left:                                  DN 50

Floor drains:                                      2 pieces DN 50

hand flaps with blind caps

 

Residual drain:                                   DN 50 with disc valve and blind cap

Connection on the pressure side:        DN 65 threaded nozzle DIN 11851

Connection suction side:                     DN 120 flange screwed

 

Homogenizer inlets mixing chamber

Rotor:                                                10 x 15 mm

Stator:                                               30 x 4 mm

Connection left:                                  DN 50 disc valve

Connection on the right:                      DN 50 disc valve

Direct dosing water:                           DN 40

Direct Dosing Oil:                               DN 40

Bottom flow:                                      DN 50 disc valve for CIP return

 

Main drive

Design:                                              three-phase motor

Power:                                               22 kW

Rated speed:                                     2960 rpm

Protection:                                         IP 54

Insulating material class:                    B

Shaft seal:                                         GLRD / single-acting

Double sheath mixing container:

Double sheath:                                   max.3 bar

Insulation sheath:                               50 mm rock wool for heating or cooling with steam

                                                         or water, etc. without valve

 

Lid

Seal design:                                       Profile seal (standard) EPDM

Pressure resistance:                           vacuum-resistant - 1 bar

Lid:                                                    1 sight glass NW 125 with wiper and lamp, 3 supports for CIP nozzles

Lid lifting device:

 

Extras / surcharge:                           2) Lid lifting device,
                                                        
surcharge depending on the
                                                         type of equipment, see price list


Mixer

Type:                                                 Scrape stirrer with flow breaker

Scraper:                                            PTFE

 

Agitator motor

 

Type:                                                 Three-phase geared motor AISI 304

Power:                                               2.3 kW

Output speed:                                    10 - 40 rpm adjustable right/left-hand run

Protection:                                         IP 54

Insulating material class:                    B

Painting:                                            RAL 1013 (Pearl White)

Seal:                                                 Garlock shaft seal

 

Nominal size:                                     DN 32

Pipe connections:                               DIN 11851

Seal quality:      EPDM

 

Extras / surcharge:                           2) Vacuum regulation
                                                        
surcharge depending on the type of equipment, see price list

Pressure sensor:                                E + H

Control voltage:                                 24 V DC

Measuring range:                               -1 / +1.5 bar

Vacuum shut-off valve:                       ball check valve

Vacuum pump:                                  water ring pump

Power:                                               1.5 kW

Protection class:                                IP 54

Insulation class:                                 F

Maintenance unit:                               water control device (24V DC)

Voltage:                                             400V, 50Hz

 

Extras/ surcharges:                           4) Oil Vacuum pump (low noise)
                                                        
surcharge depending on the type of equipment, see price list

 

Re- circulation line

Pipe size:                                           DN 65

Discharge line:                                   DN 65 perpendicular to the mixing tank

Discharge line:                                   DN 65 with discharge elbow at a height of approx. 165 cm

 

Base frame and platform

Raw frame:                                        with cover plates

Material:                                            V2A AISI 304 (1.4301)

Dimensions:                                       L = 2000 mm, W = 1200 mm, H = 2200 mm

Foot design:                                      machine feet adjustable in height

Surface treatment:                              glass beads blasted

 

Extras/ surcharges:                           5) Tank 1
                                                        
surcharge depending on the type of equipment, see price list

 

                                                         Material: AISI 316 (1.4571) Weight: 35 kg

                                                         Volume: 150 liters

                                                         Outlet: butterfly valve DN 50

                                                         Bottom design: cone

                                                         Surface quality: ground to grain 240

                                                         Attachment: on three feet

                                                         Connection line: DN 50 with hand flap

                                                         Function: Sucking in the dry matter components via vacuum

 

Extras/ surcharges:                           6) Tank 2
                                                        
surcharge depending on the type of equipment, see price list

 

                                                         Material: AISI 316 (1.4571) Weight: 20 kg

                                                         Volume: 100 liters

                                                         Outlet: butterfly valve DN 50

                                                         Bottom design: cone

                                                         Surface quality: ground to grain 240

                                                         Attachment: on three feet

                                                         Connection line: DN 50 with hand flap

                                                         Function: Sucking in the dry matter components via vacuum

 

 

                                                         Without scales, display, electronic connection and software.


Automatic dosing of water in homogenizer

Manuel inlet

 

Extras/ surcharges:                           7) Dosing
                                                        
surcharge depending on the type of equipment, see price list

                                                        
Fully automatic dosing of a preset amount of water

                                                         via IDM (Endress + Hauser)
                                                         Automatic dosing of oil in homogenizer Dosing of oil into the homogenizer

 

Cleaning CIP

 

Extras/ surcharges:                           8) CIP Nozzle for cleaning the system

                                                         surcharge depending on the type of equipment, see price list

                                                        
3 CIP nozzles with CIP rotating nozzles, pneumatic valves and pipe
                                                         connections to the automatic cleaning process of the system (Lechler)

 

Electric control standard on / off

 

Control cabinet:                                 built on the platform of the machine

Protection class:                                IP 54

Material:                                            AISI 304 stainless steel

 

Extras / surcharge:                             9) Electric control surcharge depending on the type of equipment,
                                                         see price list
                                                         Execution: Siemens PLC control Operation: via color touch panel 19 "

 


Price List:

 

 


Type Half Automatic


Type Full Automatic

A700 Basis price

€ 148.000,00

€ 156.000,00

  1.        Valve
    Kieselmann pneumatic
    Position controlled valve

2 pieces

€ 4.509,00

16 pieces

Included in Price!

  1.        Lid lifting device
    0,25 kW Fa. Becker

€ 568,00

€ 568,00

  1.        Vacuum regulator with
    DN25 Disk,
    Valve pneumatic controlled

€ 298,00

Included!

  1.        Oil Vacuum pump
    (low noises)

€ 4.016,00

€ 4.016,00

  1.      Tank 1 
    für dry material

€ 2.403,00

€ 2.403,00

  1.      Tank 2 für
    liquid material

€ 2.133,00

€ 2.133,00

  1.      Dosing
    2 x IDM von E+H

Without

€ 17.145,00

  1.      CIP Cleaning 3 x
    Spezial Fa. Lechler

€ 2.095,00

€ 2.095,00

  1.      Electric controller
    SPS-Siemens with 19“ Color Touch Panel

€ 3.915,00

€ 3.915,00

  1.   Program with recipe administration (up to 1000 recipes)

included

included

Net Item 1 – 10.

€ 172.446,00

188.275,00

  1.     Commissioning
    (on demand) plus travel expenses, overnight stay

€ 850,00/day

€ 850,00/day

 

The above price does not take into account any training or program changes (connection of additional devices).

 

Our prices are net, plus VAT, ex works D-97753 Karlstadt, freight cost share,
according to scope of delivery,
subject to prior sale and price changes

The delivery and business conditions listed on our homepage apply.

Weight1600 kg
Length2000 mm
Width1200 mm
Heigth2200 mm
MaterialV4A
Capacity700 L

Eurolux-BAV Vacuum-processing system Type A-700

 

Container capacity:                            700 liters

Batch size:                                         200 - 550 liters

Cold production: output approx.          3-4 batches / hour.

Pressure resistance:                           vacuum-proof -1 bar / + 1.5 bar

Bottom design:                                  cone

Tank inlet:                                          DN 65 right-angled, left (threaded connector DIN 11851)

Container outlet:                                DN 125 (flange firmly screwed)

Pressure relief valve:                          DN 25

 

Product area:                                     food

Product contact:                                V4A AISI 316 (1.4571)

Surface quality:                                  sanded, grain 240

Seal quality:                                       EPDM

 

Extras / surcharge:                           1) Kieselmann valves, surcharge depending on the
                                                         type of equipment, see price list

 

Fittings:                                             DIN 11851

Operation voltage:                              400 volts, 50HZ, 3 phases N, P, PE

Control voltage:                                 24V DC

Air connection:                                   ¼ “5-6 bar

Homogenizer:                                    type Eurolux 22 kW 3000 RPM

Vacuum system:                                1.5 kW

Agitator:                                            2.3 kW 10-40 rpm

 

Inlet nozzle right:                                DN 50 

Inlet nozzle left:                                  DN 50

Floor drains:                                      2 pieces DN 50

hand flaps with blind caps

 

Residual drain:                                   DN 50 with disc valve and blind cap

Connection on the pressure side:        DN 65 threaded nozzle DIN 11851

Connection suction side:                     DN 120 flange screwed

 

Homogenizer inlets mixing chamber

Rotor:                                                10 x 15 mm

Stator:                                               30 x 4 mm

Connection left:                                  DN 50 disc valve

Connection on the right:                      DN 50 disc valve

Direct dosing water:                           DN 40

Direct Dosing Oil:                               DN 40

Bottom flow:                                      DN 50 disc valve for CIP return

 

Main drive

Design:                                              three-phase motor

Power:                                               22 kW

Rated speed:                                     2960 rpm

Protection:                                         IP 54

Insulating material class:                    B

Shaft seal:                                         GLRD / single-acting

Double sheath mixing container:

Double sheath:                                   max.3 bar

Insulation sheath:                               50 mm rock wool for heating or cooling with steam

                                                         or water, etc. without valve

 

Lid

Seal design:                                       Profile seal (standard) EPDM

Pressure resistance:                           vacuum-resistant - 1 bar

Lid:                                                    1 sight glass NW 125 with wiper and lamp, 3 supports for CIP nozzles

Lid lifting device:

 

Extras / surcharge:                           2) Lid lifting device,
                                                        
surcharge depending on the
                                                         type of equipment, see price list


Mixer

Type:                                                 Scrape stirrer with flow breaker

Scraper:                                            PTFE

 

Agitator motor

 

Type:                                                 Three-phase geared motor AISI 304

Power:                                               2.3 kW

Output speed:                                    10 - 40 rpm adjustable right/left-hand run

Protection:                                         IP 54

Insulating material class:                    B

Painting:                                            RAL 1013 (Pearl White)

Seal:                                                 Garlock shaft seal

 

Nominal size:                                     DN 32

Pipe connections:                               DIN 11851

Seal quality:      EPDM

 

Extras / surcharge:                           2) Vacuum regulation
                                                        
surcharge depending on the type of equipment, see price list

Pressure sensor:                                E + H

Control voltage:                                 24 V DC

Measuring range:                               -1 / +1.5 bar

Vacuum shut-off valve:                       ball check valve

Vacuum pump:                                  water ring pump

Power:                                               1.5 kW

Protection class:                                IP 54

Insulation class:                                 F

Maintenance unit:                               water control device (24V DC)

Voltage:                                             400V, 50Hz

 

Extras/ surcharges:                           4) Oil Vacuum pump (low noise)
                                                        
surcharge depending on the type of equipment, see price list

 

Re- circulation line

Pipe size:                                           DN 65

Discharge line:                                   DN 65 perpendicular to the mixing tank

Discharge line:                                   DN 65 with discharge elbow at a height of approx. 165 cm

 

Base frame and platform

Raw frame:                                        with cover plates

Material:                                            V2A AISI 304 (1.4301)

Dimensions:                                       L = 2000 mm, W = 1200 mm, H = 2200 mm

Foot design:                                      machine feet adjustable in height

Surface treatment:                              glass beads blasted

 

Extras/ surcharges:                           5) Tank 1
                                                        
surcharge depending on the type of equipment, see price list

 

                                                         Material: AISI 316 (1.4571) Weight: 35 kg

                                                         Volume: 150 liters

                                                         Outlet: butterfly valve DN 50

                                                         Bottom design: cone

                                                         Surface quality: ground to grain 240

                                                         Attachment: on three feet

                                                         Connection line: DN 50 with hand flap

                                                         Function: Sucking in the dry matter components via vacuum

 

Extras/ surcharges:                           6) Tank 2
                                                        
surcharge depending on the type of equipment, see price list

 

                                                         Material: AISI 316 (1.4571) Weight: 20 kg

                                                         Volume: 100 liters

                                                         Outlet: butterfly valve DN 50

                                                         Bottom design: cone

                                                         Surface quality: ground to grain 240

                                                         Attachment: on three feet

                                                         Connection line: DN 50 with hand flap

                                                         Function: Sucking in the dry matter components via vacuum

 

 

                                                         Without scales, display, electronic connection and software.


Automatic dosing of water in homogenizer

Manuel inlet

 

Extras/ surcharges:                           7) Dosing
                                                        
surcharge depending on the type of equipment, see price list

                                                        
Fully automatic dosing of a preset amount of water

                                                         via IDM (Endress + Hauser)
                                                         Automatic dosing of oil in homogenizer Dosing of oil into the homogenizer

 

Cleaning CIP

 

Extras/ surcharges:                           8) CIP Nozzle for cleaning the system

                                                         surcharge depending on the type of equipment, see price list

                                                        
3 CIP nozzles with CIP rotating nozzles, pneumatic valves and pipe
                                                         connections to the automatic cleaning process of the system (Lechler)

 

Electric control standard on / off

 

Control cabinet:                                 built on the platform of the machine

Protection class:                                IP 54

Material:                                            AISI 304 stainless steel

 

Extras / surcharge:                             9) Electric control surcharge depending on the type of equipment,
                                                         see price list
                                                         Execution: Siemens PLC control Operation: via color touch panel 19 "

 


Price List:

 

 


Type Half Automatic


Type Full Automatic

A700 Basis price

€ 148.000,00

€ 156.000,00

  1.        Valve
    Kieselmann pneumatic
    Position controlled valve

2 pieces

€ 4.509,00

16 pieces

Included in Price!

  1.        Lid lifting device
    0,25 kW Fa. Becker

€ 568,00

€ 568,00

  1.        Vacuum regulator with
    DN25 Disk,
    Valve pneumatic controlled

€ 298,00

Included!

  1.        Oil Vacuum pump
    (low noises)

€ 4.016,00

€ 4.016,00

  1.      Tank 1 
    für dry material

€ 2.403,00

€ 2.403,00

  1.      Tank 2 für
    liquid material

€ 2.133,00

€ 2.133,00

  1.      Dosing
    2 x IDM von E+H

Without

€ 17.145,00

  1.      CIP Cleaning 3 x
    Spezial Fa. Lechler

€ 2.095,00

€ 2.095,00

  1.      Electric controller
    SPS-Siemens with 19“ Color Touch Panel

€ 3.915,00

€ 3.915,00

  1.   Program with recipe administration (up to 1000 recipes)

included

included

Net Item 1 – 10.

€ 172.446,00

188.275,00

  1.     Commissioning
    (on demand) plus travel expenses, overnight stay

€ 850,00/day

€ 850,00/day

 

The above price does not take into account any training or program changes (connection of additional devices).

 

Our prices are net, plus VAT, ex works D-97753 Karlstadt, freight cost share,
according to scope of delivery,
subject to prior sale and price changes

The delivery and business conditions listed on our homepage apply.

Weight1600 kg
Length2000 mm
Width1200 mm
Heigth2200 mm
MaterialV4A
Capacity700 L

10 other products in the same category: