20-00018L

Fruit and vegetable grinder with grinding ring EUROLUX Fruit and vegetable grinder with grinding ring

New product

Quantity: 1

Warning: Last items in stock!

50 600,00 €

EUROLUX

Fruit and vegetable grinder with grinding ring

Capacity: 25 tons/ h depending on the product and temperature

Description of the machine:

 

With this mill system it is possible to shred a wide variety of raw materials, adapted to the pressing system and the degree of maturity.

 

The raw material is placed in the funnel of the mill.

There is a screw in the hopper that conveys the raw material to the grinder.

The raw material is crushed in the grinder and laterally conveyed out of the grinder.

Depending on the material to be ground, different knives and grinding rings can be used.

You can also change the grinding degree through the speed.

If necessary, it is possible to overlay the grinding with inert gas

The system can be easily opened and pulled apart for cleaning.

The mill is completely assembled and wired on a frame.

Two lip seals are installed to seal the grinder on the drive shaft.

To reduce wear, water is used between the seals for cooling and lubrication. Requires approx. 60 l / h.

 

 

Technical details of the entire system:

 

Dimensions:

 

Length                                                             about 3000 mm

Width                                                              about 1200 mm

Differential height of insertion to discharge         approx. 1000 mm

Screw tube diameter                                         300 mm

Diameter grinding plate                                     300 mm

Number of knives                                             18 pcs. 2 types of knives

Throughput                                                      25 tons / h depending on the product and temperature

Required connection power                              80 amps

Water connection                                             60 l / h for lubricating water grinding plates

 

 

Electric control:

Description:

The grinder and the motor of the feed screw are supplied via frequency converters
The control is constructed with switches and a potentiometer.
The frequency converters are connected to each other to protect the grinder.
If the grinder draws too much power, the auger switches off briefly so that the grinder is not overloaded.

 

Technical design control cabinet

Control cabinet:                        Rittal stainless steel
Frequency converter:                Danfoss
Switch potentiometer and lights: Eaton
Safety relay:                             mushroom
Mühle safety switch:                 Schmersal

 

 

Switch:

Not off at the closet
Reset button for emergency stop and safety switch from Mühle, with indicator light whether emergency stop is active
Start stop rotary switch for grinder
Potti for setting the speed of the grinder
Indicator light whether the mill is running
Start stop rotary switch for the feed screw
Potti for adjusting the speed of the feed screw
Indicator light whether the feed screw is running

 

 

 

The scope of delivery includes:

1 x grinding ring ‘’rough’’
1 x grinding ring ‘’fine’’
1 set of knives   ‘’rough’’
1 set of knives     ‘’fine’’

Operating instructions: German paper format
USB stick in German and English

 

 

 

The scope of delivery does not include:

Connection of the machines in the "Water, Electricity" operation.
The connection points for this are available on the machines.
All measures that are not included in the scope of delivery and which are requested will be charged at cost.


Delivery date: approx. 6-8 working weeks / after agreement

 





EUROLUX

Fruit and vegetable grinder with grinding ring

Capacity: 25 tons/ h depending on the product and temperature

Description of the machine:

 

With this mill system it is possible to shred a wide variety of raw materials, adapted to the pressing system and the degree of maturity.

 

The raw material is placed in the funnel of the mill.

There is a screw in the hopper that conveys the raw material to the grinder.

The raw material is crushed in the grinder and laterally conveyed out of the grinder.

Depending on the material to be ground, different knives and grinding rings can be used.

You can also change the grinding degree through the speed.

If necessary, it is possible to overlay the grinding with inert gas

The system can be easily opened and pulled apart for cleaning.

The mill is completely assembled and wired on a frame.

Two lip seals are installed to seal the grinder on the drive shaft.

To reduce wear, water is used between the seals for cooling and lubrication. Requires approx. 60 l / h.

 

 

Technical details of the entire system:

 

Dimensions:

 

Length                                                             about 3000 mm

Width                                                              about 1200 mm

Differential height of insertion to discharge         approx. 1000 mm

Screw tube diameter                                         300 mm

Diameter grinding plate                                     300 mm

Number of knives                                             18 pcs. 2 types of knives

Throughput                                                      25 tons / h depending on the product and temperature

Required connection power                              80 amps

Water connection                                             60 l / h for lubricating water grinding plates

 

 

Electric control:

Description:

The grinder and the motor of the feed screw are supplied via frequency converters
The control is constructed with switches and a potentiometer.
The frequency converters are connected to each other to protect the grinder.
If the grinder draws too much power, the auger switches off briefly so that the grinder is not overloaded.

 

Technical design control cabinet

Control cabinet:                        Rittal stainless steel
Frequency converter:                Danfoss
Switch potentiometer and lights: Eaton
Safety relay:                             mushroom
Mühle safety switch:                 Schmersal

 

 

Switch:

Not off at the closet
Reset button for emergency stop and safety switch from Mühle, with indicator light whether emergency stop is active
Start stop rotary switch for grinder
Potti for setting the speed of the grinder
Indicator light whether the mill is running
Start stop rotary switch for the feed screw
Potti for adjusting the speed of the feed screw
Indicator light whether the feed screw is running

 

 

 

The scope of delivery includes:

1 x grinding ring ‘’rough’’
1 x grinding ring ‘’fine’’
1 set of knives   ‘’rough’’
1 set of knives     ‘’fine’’

Operating instructions: German paper format
USB stick in German and English

 

 

 

The scope of delivery does not include:

Connection of the machines in the "Water, Electricity" operation.
The connection points for this are available on the machines.
All measures that are not included in the scope of delivery and which are requested will be charged at cost.


Delivery date: approx. 6-8 working weeks / after agreement

 





30 other products in the same category: