18-00034Y/L

Canning Line 30.000cph Ortmann & Herbst/CFT, Kettner, SMI, HEUFT

Used

Quantity: 1

Warning: Last items in stock!

Upon question

Canning Line 30.000cph

Ortmann & Herbst/CFT, Kettner, SMI, HEUFT

 

capacity: 30.000 cph at 330ml cans

               19.000 cph at 500ml cans

can type: 211/202

              

empty can pallet: Height max. 3.000 mm,

               width max. 1.420 mm

year of manufacturing: 1994 / 1995 / 2006

 

consisting of:

 

Can depalletiser: Make Kettner, Pressant Uni 1A,

Year 1994, control unit Siemens S5-115 U, 3-site duct machine with elevator sweep-off depalletiser on high discharge table with plastic flush-grid belt, straight running mass flow conveyors with pressure-less separation, pass to can cable conveyor, separate holder for metal top-frame drop to down moving empty pallet, added layer pad remover incl. freestanding duct magazine, empty can pallet infeed with 3-track chain conveyor, corner station, empty pallet magazine, fence guarding with safety sensor, platform for operator

 

Can cable conveyor: Make TransTech Hysek, year 1995, controlled via frequency inverter

 

Gravity rinser: Make TransTech Hysek, Typ Canjet, year 1995, twister with mechanical adjustable rail, stainless steel cover, drip-out section

 

 

Filler-capper-bloc:

Filler: Make Ortmann & Herbst, Typ Hansacan 40-123, year 1994, control unit Siemens S5-100U, 40 filling valves, pitch 123 mm, mechanical filling system

Capper: Make CFT Packaging, Typ AGM6-RN, year 2000, control unit Siemens S7,

6 capping heads, short manual cap feeding

 

Can conveyor: Make Kettner, year 1994, control unit Siemens S5-115U, 5-lane mass flow conveyors after Filler, separation to 1-lane for Dating, 6-lane mass flow conveyors to Packer

 

 

Fill level inspection: Make Heuft, Typ Spectrum TX,

year 2006, X-rays, incl. pusher

 

Twist: Make TransTech Hysek, can turns upside down and back

 

Packer: Make SMI, Typ, APet 243CV, year 1995,

control unit SMI Cosmos,

6-lane infeed for single cans, 4x3 and 6x4er pack or 2-lane for Sixpack, transparent and printed film, manual reel change-over, shrink tunnel with Teflon rods, cool-down blower, (retrofiting for carton-tray possible)

 

Pack conveyor: Make Kettner, year 1995, control cabinet with frequency inverter, control unit in switch cabinet of palletiser, plastic flat-top chain, roller chain, rubber chain at incline, roller railing

 

Palletiser: Make Kettner, Pressant Uni 1N, year 1994, control unit Siemens S5-115 U,

1-lane upper infeed, roller pre-grouping station with 3 spacing device, raise row pusher transfer plate, motorised centring unit of the layer, palletising unit pivoting table, layer pad inserter with magazine, incl. pallet conveyor, roller segment, empty pallet magazine, fence guarding with safety sensor, platform for operator

 

Wrapper: Make Tempo Pack, Typ turning pallet segment, year 1995, control unit Siemens S5-95U, capacity 30 pallets/h

 

Canning Line 30.000cph

Ortmann & Herbst/CFT, Kettner, SMI, HEUFT

 

capacity: 30.000 cph at 330ml cans

               19.000 cph at 500ml cans

can type: 211/202

              

empty can pallet: Height max. 3.000 mm,

               width max. 1.420 mm

year of manufacturing: 1994 / 1995 / 2006

 

consisting of:

 

Can depalletiser: Make Kettner, Pressant Uni 1A,

Year 1994, control unit Siemens S5-115 U, 3-site duct machine with elevator sweep-off depalletiser on high discharge table with plastic flush-grid belt, straight running mass flow conveyors with pressure-less separation, pass to can cable conveyor, separate holder for metal top-frame drop to down moving empty pallet, added layer pad remover incl. freestanding duct magazine, empty can pallet infeed with 3-track chain conveyor, corner station, empty pallet magazine, fence guarding with safety sensor, platform for operator

 

Can cable conveyor: Make TransTech Hysek, year 1995, controlled via frequency inverter

 

Gravity rinser: Make TransTech Hysek, Typ Canjet, year 1995, twister with mechanical adjustable rail, stainless steel cover, drip-out section

 

 

Filler-capper-bloc:

Filler: Make Ortmann & Herbst, Typ Hansacan 40-123, year 1994, control unit Siemens S5-100U, 40 filling valves, pitch 123 mm, mechanical filling system

Capper: Make CFT Packaging, Typ AGM6-RN, year 2000, control unit Siemens S7,

6 capping heads, short manual cap feeding

 

Can conveyor: Make Kettner, year 1994, control unit Siemens S5-115U, 5-lane mass flow conveyors after Filler, separation to 1-lane for Dating, 6-lane mass flow conveyors to Packer

 

 

Fill level inspection: Make Heuft, Typ Spectrum TX,

year 2006, X-rays, incl. pusher

 

Twist: Make TransTech Hysek, can turns upside down and back

 

Packer: Make SMI, Typ, APet 243CV, year 1995,

control unit SMI Cosmos,

6-lane infeed for single cans, 4x3 and 6x4er pack or 2-lane for Sixpack, transparent and printed film, manual reel change-over, shrink tunnel with Teflon rods, cool-down blower, (retrofiting for carton-tray possible)

 

Pack conveyor: Make Kettner, year 1995, control cabinet with frequency inverter, control unit in switch cabinet of palletiser, plastic flat-top chain, roller chain, rubber chain at incline, roller railing

 

Palletiser: Make Kettner, Pressant Uni 1N, year 1994, control unit Siemens S5-115 U,

1-lane upper infeed, roller pre-grouping station with 3 spacing device, raise row pusher transfer plate, motorised centring unit of the layer, palletising unit pivoting table, layer pad inserter with magazine, incl. pallet conveyor, roller segment, empty pallet magazine, fence guarding with safety sensor, platform for operator

 

Wrapper: Make Tempo Pack, Typ turning pallet segment, year 1995, control unit Siemens S5-95U, capacity 30 pallets/h

 

15 other products in the same category: